sem_acquire

(PHP 4, PHP 5, PHP 7)

sem_acquireAcquire a semaphore

说明

sem_acquire ( resource $sem_identifier [, bool $nowait = FALSE ] ) : bool

sem_acquire() by default blocks (if necessary) until the semaphore can be acquired. A process attempting to acquire a semaphore which it has already acquired will block forever if acquiring the semaphore would cause its maximum number of semaphore to be exceeded.

After processing a request, any semaphores acquired by the process but not explicitly released will be released automatically and a warning will be generated.

参数

sem_identifier

sem_identifier is a semaphore resource, obtained from sem_get().

nowait

Specifies if the process shouldn't wait for the semaphore to be acquired. If set to true, the call will return false immediately if a semaphore cannot be immediately acquired.

返回值

成功时返回 TRUE, 或者在失败时返回 FALSE

更新日志

版本 说明
5.6.1 The $nowait parameter was added.

参见

User Contributed Notes

anatoliy at ukhvanovy dot name 06-Feb-2015 09:25
If you need non-blocking semaphores, here is an example how you may implement it. Use a shared memory variable to mark whether or not a lock exists and then use a semaphore around operations against that variable. I'll call my shared variable as 'token'.

<?php
echo '<pre>';

$resourceSemaphore = sem_get(7);
$tokenSemaphore = sem_get(8);
$tokenValue = shm_attach(9, 100);

function
myEcho($v) {
    echo
microtime() . ' ' . $v . "\n";
}

// sem_remove($resourceSemaphore);
// sem_remove($tokenSemaphore);
// exit();

function try_lock() {
    global
$resourceSemaphore, $tokenSemaphore, $tokenValue;
   
myEcho('begin try_lock()');
   
myEcho('acquire token semaphore');
   
sem_acquire($tokenSemaphore);
   
myEcho('    token semaphore acquired');
   
$tmp = shm_get_var($tokenValue, 6);
   
myEcho('    token value: ' . var_export($tmp, true));
   
$exit = $tmp;
    if (!
$exit) {
       
$tmp = shm_put_var($tokenValue, 6, true);
       
$tmp = shm_get_var($tokenValue, 6);
       
myEcho('    token new value: ' . var_export($tmp, true));
    }
   
myEcho('release token semaphore');
   
sem_release($tokenSemaphore);
    if (
$exit) return false;
   
myEcho('acquire resource semaphore');
   
sem_acquire($resourceSemaphore);
   
myEcho('    resource semaphore acquired');
    return
true;
}

function
release() {
    global
$resourceSemaphore, $tokenSemaphore, $tokenValue;
   
myEcho('release resource semaphore');
   
sem_release($resourceSemaphore);
   
myEcho('acquire token semaphore');
   
sem_acquire($tokenSemaphore);
   
myEcho('    token semaphore acquired');
   
$tmp = shm_get_var($tokenValue, 6);
   
myEcho('    token value: ' . var_export($tmp, true));
   
$tmp = shm_put_var($tokenValue, 6, false);
   
$tmp = shm_get_var($tokenValue, 6);
   
myEcho('    token new value: ' . var_export($tmp, true));
   
myEcho('release token semaphore');
   
sem_release($tokenSemaphore);
}

for (
$triesLeft = 5; $triesLeft > 0 && !try_lock(); $triesLeft--) {
   
myEcho('failed to acquire resource');
   
myEcho('wait for 1 sec');
   
sleep(1);
   
myEcho('try again');
}
myEcho('    access the resource for 4 sec');
//paste here your code, accessing your resource
sleep(4);
release();
myEcho('the end');
?>
When I execute this script in two parallel instances, I get the following output:
-------(first instance)----------------------------------------
... 482 begin try_lock()
... 482 acquire token semaphore
... 482     token semaphore acquired
... 482     token value: false
... 482     token new value: true
... 482 release token semaphore
... 482 acquire resource semaphore
... 482     resource semaphore acquired
... 482     access the resource for 4 sec
... 486 release resource semaphore
... 486 acquire token semaphore
... 486     token semaphore acquired
... 486     token value: true
... 486     token new value: false
... 486 release token semaphore
... 486 the end
-------(second instance)----------------------------------------
... 485 begin try_lock()
... 485 acquire token semaphore
... 485     token semaphore acquired
... 485     token value: true
... 485 release token semaphore
... 485 failed to acquire resource
... 485 wait for 1 sec
...
... 486 wait for 1 sec
... 487 try again
... 487 begin try_lock()
... 487 acquire token semaphore
... 487     token semaphore acquired
... 487     token value: false
... 487     token new value: true
... 487 release token semaphore
... 487 acquire resource semaphore
... 487     resource semaphore acquired
... 487     access the resource for 4 sec
... 491 release resource semaphore
... 491 acquire token semaphore
... 491     token semaphore acquired
... 491     token value: true
... 491     token new value: false
... 491 release token semaphore
... 491 the end
anatoliy at ukhvanovy dot name 06-Feb-2015 05:33
Unfortunately, PHP does not currently support non-blocking semaphores.

If something like this is necessary you can utilize semaphores together with shared memory to create your own non-blocking lock mechanisms.

Use a shared memory variable to mark whether or not a lock exists and then use a semaphore around operations against that variable.
Sander Backus 04-Nov-2013 09:01
Note that when you reset $sem_identifier the semaphore won't block anymore!

This code does NOT work:
    $key     = ftok(__FILE__,'m');
    $a        = sem_get($key);
    sem_acquire($a);
    $a = false;

while this one does:

    $key     = ftok(__FILE__,'m');
    $a        = sem_get($key);
    sem_acquire($a);
    //$a = false;

So: use unique var names for your identifier!
Pinky 13-Feb-2012 08:29
sem_acquire() is blocking, meaning that subsequent calls with the same semaphore will block indefinitely until the semaphore is released. This ensures serialization, but it is not very practical if all you want to do is check if you should proceed or not. Unfortunately, PHP does not yet support any method of querying the state of a semaphore in a non-blocking manner.

It may seem possible to put together such a mechanism by hand, using shared memory (shm_ functions). However, be warned that it is not trivial and ultimately non-productive. You cannot, for example, simply pick a shared mem var, store the semaphore key and query it. Such an operation would be non-transactional and non-atomic ie. it is possible for two or more parallel processes to manage to read "not locked" from the shared mem var before one of them manages to mark it "locked". You would have to use a (blocking) semaphore to serialize access to the shared mem var, thus recreating the very problem you are trying to solve.

In other words, if non-blocking queries are crucial to you, you need to either request that this issue be solved by the PHP designers, or pick another mechanism to do your locking, one that already has this feature.
arjuna w 28-Jan-2012 01:14
In my tests sem_acquire() is 150 times faster than flock()
gladd at trash dot eris dot qinetiq dot com 13-Apr-2004 02:02
Just to clarify what is meant by "process" above:

On the Apache webserver, many PHP requests will be executed within the same process space because it is multithreaded. However, any semaphores got and acquired by a script and not released and removed will still be automatically cleaned up by the PHP interpreter each time the script terminates.

Remove any trash before emailing!